Untitled Document

Do It Yourself Guidelines

Installations (for Precut Stickers)

  • Choose your wall decals area. Smooth surface condition required. Extreme rough surface may shorten adhesive holding time.
  • Clean up the surface with wet cloth to remove all dust, dirt & oil. Make sure the surface is dry before proceeding to the next step.
  • Confirm individual sheet location.
  • Detach decal from base.
  • Apply one sheet at a time.
  • Flatten the decal surfaces starting from center by using a plastic card.
  • Make sure decal stick firmly onto the surface.

Installation (For Decals with Transferring Film)

  • Confirm application area. Smooth surface condition required. Extreme rough surface may shorten adhesive holding time.
  • Clean up surfaces with wet cloth to remove all dust, dirt & oil. Make sure surface is dry before proceeding to the next step.
  • Trim out the image accordingly. Smaller decal size provides easier installation.
  • For decals with few images, use masking tape to hold it in position before applying.
  • This is to make sure all decals are in correct position before actual application.
  • Remove the base backing paper (usually white colour).
  • Make sure the decal stays on the transferring film.
  • Move a squeegee or plastic card over the decal at 45 degrees.
  • Apply a firm & smooth motion over the entire decal to avoid air bubbles.
  • Wait at least 10 minutes for a firm hold. Then, peel back the edge of transferring film and remove.
  • Pulling slowly & carefully away at 180 degrees to the decal. If the decal pulls away with the transferring film, re-apply with squeegee & plastic card.



Featured Products

Orchids

Orchids

$29.99
Tiles Plants

Tiles Plants

$14.99
Cat Lover

Cat Lover

$25.99